Ward Exterior Works LLC
Brand new white vinyl soffit panels and white aluminum fascia freshly installed

Rotting Soffit and Fascia Is Destroying Your Home From the Roofline Down

Ward Exterior Works replaces damaged soffit and fascia across River Falls, Hudson, and western Wisconsin before small roofline problems turn into expensive structural damage.

Soffit and Fascia Solutions for Wisconsin Homes

Vinyl Soffit

Vinyl soffit is the most common replacement choice for Wisconsin homes. It resists moisture, insects, and freeze thaw cycles without painting or maintenance. Vented vinyl soffit panels allow proper attic airflow which reduces ice dam formation in winter and heat buildup in summer.

Aluminum Fascia

Aluminum fascia wraps the board running along your roofline where gutters attach. It protects the underlying wood from water infiltration and eliminates the need for repeated painting. Properly installed aluminum fascia paired with new gutters gives your roofline a clean finished appearance that lasts decades.

Full Roofline Replacement

When soffit and fascia are both damaged, Shane assesses the underlying wood structure before installing new material. If the decking or rafter tails are rotted, those are replaced first so the new soffit and fascia have a solid foundation. Covering rotted wood with new material is not a repair, it is a delay.

What Does Soffit and Fascia Replacement Cost in Wisconsin?

Soffit and fascia replacement on an average single family home in Wisconsin typically runs between $1,500 and $5,000 depending on linear footage, material choice, and whether any underlying wood repair is needed.

Homes with significant wood rot or structural damage to rafter tails or decking will run higher because the wood repair has to happen before new material goes on. Shane identifies all underlying issues during the on site assessment and includes everything in your written estimate so there are no surprises mid project.

Shane gives every homeowner a detailed written estimate before any work starts so you know exactly what you are paying for.

These are market averages. Your actual cost depends on your home's linear footage, material condition, and whether underlying wood repair is needed. Call Shane at 715-808-5260 for a free on site estimate.

Worker installing white vinyl soffit panels along roofline

How Do You Know When Your Soffit and Fascia Need to Be Replaced?

You see peeling paint or staining along your roofline.Water is getting behind the fascia and saturating the wood underneath. Paint will not fix this. The fascia board needs to come off and the damage underneath needs to be assessed.

You notice soft spots or visible rot on your fascia board.Rot spreads fast in Wisconsin winters with repeated freeze thaw cycles. Once it reaches the rafter tails the repair cost increases significantly. Catching it early saves money.

Birds or insects are getting into your attic.Open or damaged soffit panels are a direct entry point for starlings, sparrows, wasps, and carpenter bees. New vented soffit panels close those entry points while maintaining proper airflow.

Your gutters are pulling away from the house.Gutters attach to the fascia board. When the fascia rots the gutters lose their anchor and begin to separate from the roofline. Replacing the fascia is the fix, not re-hanging the gutters.

You see daylight or dark staining inside your attic along the eaves.Water infiltration through failed soffit or fascia shows up as staining on attic sheathing and insulation. Left alone this leads to mold and structural damage.

How Shane Handles a Soffit and Fascia Replacement Project

01

Free On Site Assessment

Shane inspects your full roofline, identifies all damaged soffit and fascia, checks underlying wood for rot and structural issues, and gives you an honest assessment of what needs to happen.

02

Written Estimate with Full Scope

Shane provides a detailed written estimate covering all material, labor, and any underlying wood repair needed. No surprises after the job starts.

03

Wood Repair and Material Installation

Any rotted rafter tails or decking are repaired first. New soffit panels and aluminum fascia are then installed to manufacturer specifications with proper venting maintained throughout.

04

Cleanup and Final Walkthrough

Ward Exterior Works removes all old material and debris and leaves your property clean. Shane walks you through the completed work before considering the job done.

Why Wisconsin Homeowners Choose Ward Exterior Works for Soffit and Fascia

They Fix What Is Actually Wrong

Shane does not cover rotted wood with new material and call it done. If the underlying structure is damaged it gets repaired first. That is the difference between a repair that lasts and one that fails in three years.

Shane Is On Every Job

Shane Ward does not send a crew and disappear. He is on site managing the work and accountable for every detail from the first board removed to the final panel installed.

Clean Job Sites

Ward Exterior Works removes all old soffit, fascia, and debris and leaves your property cleaner than they found it. No material left in your yard, no damage to your landscaping.

Financing Available

Soffit and fascia projects can be financed through Wisetack. Ask Shane about options when he comes out for your estimate.

Services We Offer

Areas We Serve

Soffit and Fascia FAQs

What is the difference between soffit and fascia?

Fascia is the vertical board that runs along the roofline where your gutters attach. Soffit is the horizontal panel that covers the underside of your roof overhang between the fascia and the exterior wall. Both work together to protect your roofline and attic from moisture and pests.

Can you just paint over damaged fascia instead of replacing it?

Paint covers the surface but does not stop rot from spreading underneath. If the fascia board has soft spots, staining, or visible deterioration, painting over it delays the problem for one or two seasons and then makes the repair more expensive because the rot has spread further into the underlying structure.

How long does soffit and fascia replacement take?

Most average single family homes take one to two days for a full soffit and fascia replacement. Homes with significant underlying wood rot that needs repair first will take longer. Shane will give you a realistic timeline during the estimate.

Will new soffit and fascia help with ice dams?

Proper attic ventilation is one of the key factors in reducing ice dam formation. Vented soffit panels allow cold outside air to enter the attic and push warm air out through ridge vents, which keeps the roof deck temperature more uniform and reduces the freeze thaw cycle that creates ice dams.

Does Ward Exterior Works offer financing for soffit and fascia projects?

Yes. Financing is available through Wisetack. Ask Shane about your options when he comes out for your free estimate.

Does soffit and fascia replacement require a permit in Wisconsin?

Most soffit and fascia replacement projects in Wisconsin do not require a permit because they are considered maintenance and replacement work rather than structural changes. However, if underlying rafter tails or decking need significant structural repair, Shane will let you know during the estimate if a permit applies to your specific project.

Can soffit and fascia be replaced in winter in western Wisconsin?

Shane and his crew can complete soffit and fascia work in cooler temperatures as long as conditions are safe. Wisconsin winters are hard on rooflines and many homeowners notice damage in fall or winter. Shane will assess conditions during the estimate and schedule accordingly so the work is done right.

What brands or materials does Ward Exterior Works use for soffit and fascia?

Shane installs aluminum fascia and vinyl soffit panels from reputable manufacturers built for cold climate performance. Material selection depends on your existing roofline profile and what matches your home. Shane will go over options and show you samples during the on site estimate.

How do I know if my gutters need to be replaced at the same time as the fascia?

When the fascia board is rotted, the gutter anchors lose their holding strength and the gutters often pull away or sag. Shane inspects the gutter attachment points during the roofline assessment. If the gutters are failing because of fascia damage, he will include that in the scope of the written estimate so everything gets addressed in one project.

Does Ward Exterior Works serve the Hudson and New Richmond areas for soffit and fascia?

Yes. Shane and his crew serve Hudson, New Richmond, River Falls, Ellsworth, Prescott, and the surrounding St. Croix Valley communities for soffit and fascia replacement. If you are seeing roofline damage anywhere in western Wisconsin, call Shane at 715-808-5260 for a free on site assessment.

Ready to Protect Your Roofline Before the Damage Gets Worse?

Call Shane at 715-808-5260 or request a free estimate online. Ward Exterior Works serves River Falls, Hudson, and surrounding western Wisconsin communities.

Avatar
Hi there! Have a question? Chat with us here.